IPC 2013 : D01H 7/00 : Spinning or twisting arrangements (for open-end spinning D01H 4/00).

IPC2013 > D > D01 > D01H > D01H 7/00[m] > Spinning or twisting arrangements (for open-end spinning D01H 4/00).
Notes[t] D01 - D07: TEXTILES OR FLEXIBLE MATERIALS NOT OTHERWISE PROVIDED FOR
Notes[g] D01H 1/00 - D01H 7/00: Kinds or types of spinning or twisting machines; Drafting machines or arrangements; Twisting arrangements
D01H 7/02 · for imparting permanent twist.
D01H 7/04 · · Spindles (spindle bearings, supports therefor, in general F16C).
D01H 7/06 · · · Stationary spindles with package-holding sleeves.
D01H 7/08 · · · Mounting arrangements.
D01H 7/10 · · · · Spindle supports; Rails; Rail supports, e.g. poker guides.
D01H 7/12 · · · · Bolsters; Bearings.
D01H 7/14 · · · · Holding-down arrangements.
D01H 7/16 · · · Arrangements for coupling bobbins or like to spindles.
D01H 7/18 · · · Arrangements on spindles for suppressing yarn balloons (thread guards or protectors D01H 1/42).
D01H 7/20 · · · Lubricating arrangements.
D01H 7/22 · · · Braking arrangements.
D01H 7/24 · · Flyer or like arrangements (multiple-twist arrangements D01H 7/86).
D01H 7/26 · · · Flyer constructions.
D01H 7/28 · · · · arranged to guide material over exterior of legs.
D01H 7/30 · · · · with guide channels formed in legs, e.g. slubbing flyers.
D01H 7/32 · · · · · with pressing devices.
D01H 7/34 · · · · with haul pulleys or like arrangements.
D01H 7/36 · · · · with traversing devices.
D01H 7/38 · · · · Ring flyers.
D01H 7/40 · · · Flyer supports, e.g. rails.
D01H 7/42 · · · Arrangements coupling flyers to spindles.
D01H 7/44 · · · Drag arrangements for bobbins or flyers.
D01H 7/46 · · · Devices attached to, or integral with, flyers for temporarily increasing twist in material passing to them.
D01H 7/48 · · · Eyes or like guiding arrangements (D01H 7/46 takes precedence).
D01H 7/50 · · · Interrelated flyer and bobbin drive mechanisms, e.g. winding-on motions for cotton-roving frames (package-building mechanisms D01H 1/36).
D01H 7/52 · · Ring-and-traveller arrangements.
D01H 7/54 · · · with fixed rings.
D01H 7/56 · · · with freely-rotatable rings; with braked or dragged rings.
D01H 7/58 · · · with driven rings.
D01H 7/60 · · · Rings or travellers; Manufacture thereof not otherwise provided for (hand tools for applying travellers to rings D01H 17/02).
D01H 7/62 · · · Arrangements providing lubricant for travellers.
D01H 7/64 · · · Ring supports, e.g. ring rails (poker guides or other rail supports D01H 7/10).
D01H 7/66 · · Cap arrangements.
D01H 7/68 · · · Cap constructions.
D01H 7/70 · · · Arrangements for supporting caps on spindles.
D01H 7/72 · · · Bobbin-supporting arrangements, e.g. bobbin rails (poker guides or other rail supports D01H 7/10).
D01H 7/74 · · Cup or like arrangements.
D01H 7/76 · · · Rotary discs.
D01H 7/78 · · · Constructions of cups, e.g. spinning boxes.
D01H 7/80 · · · · adapted to collect wet yarns.
D01H 7/82 · · · Casings or guards for rotary cups or the like.
D01H 7/84 · · · Spindles or yarn carriers for co-operation with rotary cups (removing yarn from centrifugal cups on to yarn carriers D01H 9/06).
D01H 7/86 · · Multiple-twist arrangements, e.g. two-for-one twisting devices.
D01H 7/88 · · Hollow-spindle arrangements (D01H 7/86 takes precedence).
D01H 7/90 · · Arrangements with two or more twisting devices in combination (D01H 7/86, D01H 7/88 take precedence).
D01H 7/92 · for imparting transient twist.

CIP2013: Invenciones publicadas en esta sección.

  1. 1.-

    PROCEDIMIENTO Y DISPOSITIVO PARA LA OBTENCION DE UN HILO TORCIDO.

    . Solicitante/s: INSTITUT TEXTILE DE FRANCE AGENCE NAT.VALORISATION RECHERCHE(ANVAR).

    DISPOSITIVO Y PROCEDIMIENTO PARA LA OBTENCION DE UN HILO TORCIDO, DEL TIPO QUE PRESENTA SOBRE SU LONGITUD ZONAS DE TORSION ALTERNATIVAMENTE DE SENTIDOS S Y Z. EL DISPOSITIVO CONSTA DE UN SOPORTE PARA EL ALMACENAJE DE LA MATERIA A TRATAR; DE UN SUMINISTRADOR POSITIVO DEL HILO ELEMENTAL, CONSTITUIDO POR EL ULTIMO PAR DE CILINDROS DE TRACCION DE UN TREN DE ESTIRADO CONVENCIONAL CON DOBLE MANGUITO; DE UN HUSO DE FALSA TORSION ARRASTRADO EN ROTACION A VELOCIDAD CONSTANTE; DE UN BLOQUEADOR QUE ACTUA DE FORMA INTERMITENTE EN UN PUNTO SITUADO LO MAS CERCA POSIBLE DEL ELEMENTO QUE COMUNICA LA FALSA TORSION Y MEDIANTE EL CUAL SE REALIZA, SIN FRENADO DEL HILO, LA VARIACION DE LONGITUD DE ASCENSION DE TORSION; Y DE UN ELEMENTO PARA EL ARROLLADO DEL HILO FORMADO.

  2. 2.-

    PROCEDIMIENTO Y DISPOSITIVO PARA TORCIDO DE UN HILO.

    . Solicitante/s: EVOLUTION, S. A.

    Resumen no disponible.

  3. 3.-

    PROCEDIMIENTO PARA LA FABRICACION DE UN CORREDOR PARA MAQUINAS HILADORAS ANULARES Y RETORCEDORAS ANULARES.

    . Solicitante/s: REINERS & FURST.

    Resumen no disponible.